Trianglelab
Showing all 26 results
-
Select options This product has multiple variants. The options may be chosen on the product page24V V6 Hotend Kit with 4.1mm Bore Wade Heat Break | 0.4mm Nozzle 1.75mm | Complete 3D Printer Hotend Upgrade for Ender 3 CR-10 Reprap Bowden Systems
$40.00 -
Sale! -14%
Add to cartMORE INFO3D Touch Auto Bed Leveling Sensor – BLTouch Clone | Ender 3 / CR-10 / Ender 5 Upgrade | 3D Printer Auto Leveling Kit
Original price was: $35.00.$29.95Current price is: $29.95.Compatible With:
• Ender 3 / 3 Pro / V2 / Neo / S1 (with correct firmware)
• CR-10 / CR-10S / CR-10 Mini / V2 / V3
• Ender 5 / 5 Pro / 5 Plus
• Any printer that supports BLTouch with open firmware
• Compatible with 8-bit and 32-bit mainboards (V1.1.5, V4.2.2, V4.2.7, SKR Mini, etc.)✔️ Eliminate manual bed leveling
✔️ Improved first-layer adhesion & print success
✔️ Quiet, reliable, and accurate
✔️ Works on any build surface – glass, PEI, metal, etc.
✔️ Compatible with 8-bit & 32-bit Creality boards (with PIN 27 board or firmware mod)Compatible With: Ender 3 / CR-10 / Anet A8 / Tevo / RepRap / MK8 / i3
Kit Includes: 1 x 5 Pin Connector
2 x Screws, Nuts & Washers
1 x 80cm Extension Wires
-
Select options This product has multiple variants. The options may be chosen on the product page3D Touch Sensor Replacement Pin | Probe Tip for 3DTouch / BLTouch | Orange or Transparent | Auto Bed Leveling Probe Part
$3.50• Creality Ender 3 / Pro / V2 / Neo (using 3DTouch or clone sensors)
• CR-10 / CR-10S / CR-10 V2 / V3
• Any printer with BLTouch-compatible clone sensors -
Sale! -45%
Add to cartMORE INFOBi-Metal Heat Break for Creality CR-6 SE – 1.75mm Filament | All-Metal High Temp Upgrade | Reduces Heat Creep | OEM Compatible
Original price was: $19.95.$10.95Current price is: $10.95.✔️ Eliminates heat creep and filament jams
✔️ Improves print consistency at higher temps
✔️ Enables use of abrasive and exotic filaments
✔️ All-metal construction = longer lifespan
✔️ Drop-in upgrade – no modification needed -
Sale! -39%
Add to cartMORE INFODDE Orbiter Extruder Complete Kit Ender 3 / Ender 3 Pro / CR-10 / CR-10S / Ender 5 – Complete Kit
Original price was: $139.99.$85.99Current price is: $85.99.DDE Orbiter Extruder Complete Kit Ender 3 / Ender 3 Pro / CR-10 / CR-10S / Ender 5
Compatible With: 12V or 24V Power Supplies for Ender 3 / Ender 3 Pro / Ender 5 / CR-10 / CR-10S / Alfawise U20 (Backplate Required)
-
Select options This product has multiple variants. The options may be chosen on the product pageDual Drive Extruder 1.75mm with Bracket (Right) | All Metal Direct Drive Upgrade | Right-Hand 3D Printer Extruder | Compatible with Ender / CR-10
Price range: $7.50 through $8.50 -
Sale! -40%
Add to cartMORE INFOM8 Inductive Proximity Sensor 5V | 3-Wire 2mm Detection Z Probe for Auto Bed Leveling | Ender 3 CR-10 CNC Upgrade | 3D Printer Inductive Sensor
Original price was: $14.95.$8.99Current price is: $8.99.M8 Inductive Proximity Sensor DC5V 3-Wire 2mm for 3D Printer Z Probe Auto Bed Leveling CR10 ENDER3
-
Sale! -29%
Add to cartMORE INFOMatrix Extruder Hotend | All Metal High Temp Hotend | Direct Drive / Bowden Compatible | 3D Printer Hotend Upgrade | Ender 3 CR-10 CR-10S
Original price was: $140.00.$99.99Current price is: $99.99.Features: Dual Drive All Metal Extruder with Adjustable Tension Idler,
Very short filament path, Thin Walled Bi-Metal Heat Break. -
Select options This product has multiple variants. The options may be chosen on the product pageV6 All Metal Hotend Complete Kit | 12V or 24V | 0.4mm Nozzle 1.75mm | High Temp 3D Printer Hotend Upgrade for Ender 3 CR-10 Voron Reprap | Full V6 Assembly
$29.9912V or 24V – V6 All Metal Hotend – 0.4mm Brass Nozzle – 1.75mm Filament Complete Kit
-
Add to cartMORE INFOV6 Hotend Kit with 4.1mm Bore Wade Heat Break | 0.4mm Nozzle | 1.75mm Filament | 12V/24V Bowden Hotend for Ender 3 CR-10 Reprap Voron 3D Printers
$25.00Upgrade your 3D printer with this V6 Hotend featuring a 4.1mm Bore Wade Type Heat Break — specially designed for Bowden setups and flexible filament printing.
The 4.1mm bore Wade style heat break allows your PTFE tube to sit deeper into the heat break for a shorter filament path — resulting in smoother extrusion, better support for flexible filaments, and fewer jams.
