Catalog
MK8 Stainless Steel M6 All Metal Heat break 4.1mm Bore For CR-10 CR-10S Ender 3 Series
Compatible With: CR-10 / CR-10S / Ender 3 Series
M6 x 26mm 4.1mm bore diameter
Throat Length: 26mm
Inside Diameter: 4.1mm
Outer Diameter: 6mm
$3.99
MK8 Copper Plated Heater Block
MK8 Copper Plated Heater Block
The Copper Plated Block Has Excellent Heat Transfer Capabilities and is Ideal for High Temperature Printing
Printing Temperature up to: 550°C
NOTE: If printing higher than 280°c remove silicone sock.
$30.99
300mm x 300mm PEI Build Surface with Magnetic Base
300mm x 300mm PEI Build Surface with Magnet Made with real Ultem1000 Recommended Bed Temps: PLA - 60°C ...
$75.99
$65.99
400mm T8 Lead Screw with Copper Nut
T8 400mm Lead Screw with Copper Nut
Lead Screw Length: 400mm
Lead Screw Diameter: 8mm
Coupler Shaft Usage: 5mm to 8mm
Coupler Dimension: 25 * 19mm
Pillow Bearing Block Bore: 8mm
$10.99
Aluminum Extruder Direct Drive Back Plate Ender 3 CR-10 Ender 5
Aluminum Extruder Direct Drive Back Plate
Compatible With: Ender 3 / Ender 3 Pro / CR-10 / Ender 5
$25.99
$19.99
MK10 - M7 Thread - Stainless Steel Nozzle 0.4mm 1.75mm Filament
MK10 Stainless Steel Nozzle 0.4mm 1.75mm
$3.54
E3D V6 Clone Volcano Hotend 24V 1.75mm Filament
E3D V6 Clone Volcano Hotend 24V With Cooling fan bracket for E3D Hotend With PT100 1.75mm filament. Kit Includes: Volcano Nozzle 0.4mm Heat Break 1.75mm for E3D Hotend ...
$49.99
$45.00
Frame Brace Kit for 300 x 300 x 400 3D Printers
300mm x 300mm x 400mm Frame Brace Kit Compatible With: CR-10 / CR-10S / CR-10S4 / Alfawise U20 / Tevo Tornado / Anet E12 Kit Includes: 2 x Tie Rod ...
$69.99
24V 40W Heater Cartridge With Plug Connector 2M - 3D Printer Parts
24V 40W Heater Cartridge With Plug Connector 2M
Wire Length: 2 metres
Cartridge Size: 6 x 20mm
Material: Stainless Steel
Heating Pipe Feature: Heats Fast, Easy & Convenient To Replace The Heater Cartridge.
$10.49
DDE Orbiter Extruder Complete Kit Ender 3 / Ender 3 Pro / CR-10 / CR-10S / Ender 5
DDE Orbiter Extruder Complete Kit Ender 3 / Ender 3 Pro / CR-10 / CR-10S / Ender 5 Compatible With: 12V or 24V Power Supplies for Ender 3 / Ender 3 Pro / Ender 5 / CR-10 / CR-10S / Alfawise...
$149.99
$139.99
PTFE Bowden Tube 1M for 1.75mm Filament (Various Colours)
- Red
PTFE Bowden Tube
Inside Diameter: 2mm
Outside Diameter: 4mm
Length: 1M
Filament: 1.75mm
$6.99
-
Red
-
White
-
Blue
-
Black
- + 1
Creality Ender 3 / Ender 3 Pro / V2 Frame Brace Kit
Creality Ender 3 / 3 Pro / V2 Frame Brace Kit Compatible With: Ender 3 / Ender 3 Pro / Ender 3 V2 / Kit Includes: 2 x Pull Rod(36.5cm) 4...
$62.99
Official Creality 4010 Brushless Fan
Creality 4010 Brushless Fan
Compatible With: Ender 3 / Ender 3 Pro / CR-10
$13.99
M3 M4 M5 - T Slot Nut for 2020 Extrusion
M3 / M4 / M5 T Slot Nut for 2020 Extrusion M3 / M4 / M5
$0.45
TC4 Titanium Alloy MK8 Nozzle 0.4mm 1.75mm
TC4 Titanium Alloy MK8 0.4mm 1.75mm
Compatible With: Ender 3 / Ender 3 Pro /Ender 3 V2 / CR-10 / CR-10S / Ender 5 / Two Trees Saphire / Two Trees Bluer / Two Trees Pro
0.4mm Nozzle
1.75mm Filament
$9.99
Aluminum Y Carriage Upgrade for Ender 3 / Ender 3 Pro / Ender 3s
Based off of the Gulf Coast Robotics design, this supports 3-point leveling with the stock heated bed. This helps to reduce the time required to level the bed and maintains a flat surface longer than the traditional 4 point plates....
$48.99
$39.99
3D Touch Auto Bed Leveling Sensor - BLTouch Clone - 3D Printer Parts
3D Touch Auto Bed Leveling Sensor Compatible With: Ender 3 / CR-10 / Anet A8 / Tevo / RepRap / MK8 / i3 Kit Includes: 1 x 5 Pin Connector ...
$35.00
Set of Four Aluminum Bed Leveling Nuts (Red)
One Set of Four Aluminum Bed Leveling Nuts
Material: Aluminum
Colour: Red
$17.99
$12.99
T8 Anti-Backlash Lead Screw Brass Nut Ender 3 / CR-10
Compatible With: Ender 3 / Ender 3 Pro / Ender 3 V2 / CR-10 / CR-10S / Tornado / Clone
Material: Brass
8mm Lead
$6.00
Volcano V6 Compatible Copper Plated Nozzle M6 Thread 1.75mm
Volcano V6 Compatible Copper Plated Nozzle M6 Thread 1.75mm
Nozzle Temp: Up to 500°C
$25.99